How to Load SA156 Prewound Bobbins in a Brother Embroidery Machine

Published 11/15/2026 · Updated 11/16/2026

A compatibility-first guide to New Brothread SA156 / Class 15 / Size A prewound bobbins, including the 25-pack's 60 wt white thread, a thin-thread review note, and a reminder to check the machine manual.

Products mentioned in this guide

How-To and Techniques · Embroidery Supplies and Accessories

Last updated: November 2026

Quick verdict: Confirm the bobbin class in your manual before you open a pack. The New Brothread SA156 prewound bobbins are labeled Size A / Class 15 / SA156: 25 white plastic-sided bobbins, wound with 60 wt (70D/2) thread, claimed at 130 m each. They suit Brother and other machines that take that class. They will not fit machines that take a different class, including L, M, or metal-sided styles this pack does not claim to be. We have not tested fit on every Brother model, and some reviews say the thread is thin. At our 15 November 2026 check the Amazon US listing showed $8.99, In Stock, sold by "New brothreads" (plural, as written on that fetch) and shipped from Amazon, Amazon's Choice, with a rating of 4.7/5 from 4,926 ratings and 100+ bought in the past week.

Confirm the class first

SA156, Class 15 and Size A are the three names this listing uses for the same pack. Google autocomplete around this product also asks "are SA156 bobbins class 15" and "SA156 bobbins vs class 15," which is why the labeling matters. Check the bobbin type printed in your machine manual, or on a bobbin that already runs well in the case, and only then buy this ASIN (B077YZQDCF). Color and size options exist; this page is the 60 wt white 25-pack only.

See the New Brothread SA156 bobbins product page, or check the Amazon listing.

Step 1: Power off and open the bobbin case the way the manual shows

Follow the threading chapter for your exact model. A first-session walkthrough for one 4 x 4 Brother combo is in how to set up the Brother SE700; a PE900 walkthrough is in how to set up the Brother PE900. Those guides do not replace the manual, and this article does not invent a drop-in diagram for every machine.

Step 2: Drop in the prewound, plastic side as your manual describes

These bobbins are plastic-sided and prewound, so you are not winding 40 wt top thread onto an empty bobbin. Seat the bobbin in the direction the manual shows, pull the thread through the tension spring, and close the cover. If the bobbin sits high, wobbles, or will not close, stop; you may have the wrong class.

Step 3: Pair them with 40 wt top thread, then watch the first stitches

White 60 wt is the usual bobbin-thread weight to go with 40 wt polyester top thread, such as the New Brothread 40-color kit. The listing claims 130 m per bobbin; we have not measured that length. Some reviews say the thread is thin. If you see looping, a visible bobbin color, or a thread break, stop and re-check class, insertion direction and tension against the manual rather than forcing a longer stitch-out. See the New Brothread 40-color thread kit product page, or check the Amazon listing.

Frequently asked questions

Are SA156 bobbins the same as Class 15?

This listing uses Size A, Class 15 and SA156 together for this 25-pack. Still confirm that wording against your manual before you buy.

Will they fit a Janome Memory Craft 1000 or 100e?

Only if that machine's manual calls for this bobbin class. The 1000 and 100e listings in our catalog do not spell out a bobbin class, so we do not claim fit. See Janome Memory Craft 1000 vs 100e.

Related guides

← All guides